CBQ46-SDS2 Column Base

*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog.

**Click Load Table icon for size & fastening requirements.

---

**THIS PRODUCT IS BEING DISCONTINUED IN 2010, replacement product is CBSQ44-SDS2**

**PLEASE CALL BEFORE ORDERING TO CHECK AVAILABLE STOCK**

---

The CBQ uses Simpson Strong-Tie® Strong-Drive® screws (SDS), which allows for fast installation, reduced reveal and high capacity, providing a greater net section area of the column compared to bolts.

Material: See table.

Finish: Galvanized, available in HDG with HDG screws.

Installation:

Use all specified fasteners. See General Notes. Install Simpson Strong-Tie SDS 1/4"x2" wood screws, which are provided with the column base. (Lag screws will not achieve the same load.) For full loads, a minimum of 3" side cover shall be provided. Install bottom of base plate flush with concrete surface. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Ordering: To order with screws, specify CBQ-SDS2. To order without screws, specify CBQ.