ECCLRQ464SDS Column Cap

---

Simpson Strong Tie ECCLRQ464SDS Column Cap

---

*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog.

**Click the PDF Link below for the special order worksheet for sizes & ordering requirements.

---

ECCLQ/CCCQ/CCTQ Column Caps

LEAD TIME: May be up to 3 Days

The ECCLQ, CCCQ and CCTQ column caps provide high capacity, multiple beam to column connector options. The design uses Simpson Strong-Tie® Strong-Drive® screws (SDS) screws to provide faster installation and a lower profile compared to standard through bolts. Screws are configured to provide high uplift design values.

Material: 7 gauge.

Finish: Simpson Strong-Tie® gray paint, also available in HDG.

Installation:

•Install Simpson's SDS 1/4"x2 1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.)

• No additional welding is allowed

Options:

•Many combinations of beam and post sizes can be manufactured.

•Available in widths up to 8" wide.

• ECCLQ is available in left or right side beam orientations. Specify ECCLLQ or ECCLRQ.

•Straps may be rotated where W1 > W2.

•Column caps may be ordered without the column straps for field welding to a column. No loads apply. Specify CCCOQ/CCTOQ/ECCLOQ.

Ordering:

•The L dimension varies depending on the width of the side stirrup (W3 or W4). Contact Simpson Strong-Tie for exact dimensions.

•Main beam stirrup height (H1) is 7". Side beam stirrups (H2 or H3) can vary in height with the minimum height of 7". Specify the side stirrup height from the top of the cap.

•Example Order: 4x Main Beam, 6x Post, 4x Side Beam (oriented to the left) is ordered as an ECCLLQ464SDS.