FSC Floor Span Connector

*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog.

**Click Load Table icon for size & fastening requirements.

---

FSC Floor Span Connector

As an alternative to coil strap, our new FSC-Floor Span Connector connects upper floors to lower floors from the inside of the wall. The convenient obround holes make installation in narrow wall cavities easy. Installs with a 3/8" all thread rod, nut and washer (not included).

Material: See table.

Finish: Galvanized.

Installation:

•Can be used on a single 2x stud.

•Threaded rod, washers and nuts are not supplied with the FSC.

•Use 3/8" threaded rod, grade A307 or better, with matching nuts and cut washers.

•FSC may be installed a maximum of 18" from the sill or top plates.

•Drill 1/2" to 3/4" diameter hole through the plates for threaded rod access, hole should be located approximately 1 1/2" away from the face of stud used for FSC attachment.

•Nails can be installed up to 30 degree angle with no reduction in load capacity.