HGUQ28-3-SDS4.5 Multi-Ply Girder Truss Hanger

*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog.

**Click Load Table icon for size & fastening requirements.

---

HGUQ Multi-Ply Girder Truss Hangers

HGUQ hangers provide similar capacities as HGUS double shear hangers, but they use Simpson Strong-Tie® Strong-Drive® SDS screws instead of nails for faster and easier installation. In addition, the SDS screws help transfer the load between the plies of the supporting girder when they penetrate all plies.

Material: 12 gauge.

Finish: Galvanized

Installation:

•Use all specified fasteners. See General Notes.

•Simpson Strong-Tie Strong-Drive SDS screws supplied.

•Not designed for welded or nailer applications.

• The thickness of the supporting girder must be equal to or greater than the screw length. For applications where the length of the supplied screws exceeds the thickness of the supporting girder, 3" or 4 1/2" screws may be substituted for the longer length screws with no load reduction, or a shim block may used as approved by the Designer.

Options:

•These hangers cannot be modified.