Product Overview
HRC1.81 Hip Ridge Connector
HRC is a field slopeable connector that attaches hip roof beams to the end of a ridge beam. The HRC may be sloped downward a maximum of 45°.
Material:
16 gauge
Finish:
Galvanized (G90)
Installation:
Use all specified fasteners; see General Notes.
On end of ridge — use optional diamond holes to secure the HRC. Bend face flanges back flush with ridge, and complete nailing.
On face of ridge — adjust to correct height and install nails.
Double bevel-cut hip members to achieve full bearing capacity.
The HRC may be sloped to 45° with no reduction in loads
HRC is a field slopeable connector that attaches hip roof beams to the end of a ridge beam. The HRC may be sloped downward a maximum of 45°.
Material:
16 gauge
Finish:
Galvanized (G90)
Installation:
Use all specified fasteners; see General Notes.
On end of ridge — use optional diamond holes to secure the HRC. Bend face flanges back flush with ridge, and complete nailing.
On face of ridge — adjust to correct height and install nails.
Double bevel-cut hip members to achieve full bearing capacity.
The HRC may be sloped to 45° with no reduction in loads
