HSS4KT Heavy Stud Shoe Kit (4 Pack w/Screws)

*For further description please see Simpson Strong-Tie Wood Construction Connectors Catalog.

**Click Load Table icon for size & fastening requirements.

---

HSS/SS Stud Shoes

Stud Shoes reinforce studs notched in construction. They are NOT a total replacement of removed material. Installs over pipe up to 2 3/8" outside diameter.

HSS2-3 is designed for triple 2x studs.

HSS Stud Shoes provide tension load capacity as well as increased compression loads. Flared flange provides greater strength.

Material: 16 gauge.

Finish: Galvanized

Installation:

•Use all specified fasteners. See General Notes.

•HSS: Bend flanges at 90° angle during installation, then bend back and screw into position (screws supplied).

•Bend flanges one cycle only.

Codes: Also see Code Reports. HSS2-SDS1.5 (16 gauge) Heavy stud shoes to reinforce and protect single 2x studs where pipe is located. Uses 12 Simpson Strong-Tie® Strong-Drive® 1/4"x1 1/2" SDS screws (included).

◦IRC - 2006 R602.6 and P2603.2.1

◦ IBC - 2006 2308.9.10 & 2308.9.11

◦ IPC - 2000/2003/2006 305.8

HSS2-3-SDS3 (16 gauge) Heavy stud shoe for triple 2x stud. Uses 12 Simpson Strong-Tie® Strong-Drive® 1/4"x3" SDS screws (included).

◦ IRC - 2006 R602.6 and P2603.2.1

◦ IBC - 2006 2308.9.10 & 2308.9.11

◦ IPC - 2006 305.8

SS1.5 (16 gauge) stud shoes reinforce and protect plumbing in 2x.

◦ IRC - 2006 R602.6 and P2603.2.1

◦ IBC - 2006 2308.9.10 & 2308.9.11

◦ IPC - 2006 305.8