Product Overview
HSUL210-2Z Skewed 45 Hanger
The SU and HSU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper installation.
Material:
SUR and SUL — 16 gauge; HSUR and HSUL — 14 gauge
Finish:
ZMAX
Installation:
Use all specified fasteners; see General Notes
These hangers will normally accommodate a 40° to 50° skew
Illustration shows left and right skews SUR/L (SUR = skewed right; SUL = skewed left)
The joist end may be square cut or bevel cut
Options:
Available with the A2 flange turned in on the 2-2x and 4x models only (see illustration)
To order, add "C" (for concealed) to the product name
For example, specify HSURC46, HSULC46, SURC46 or SULC46
The SU and HSU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper installation.
Material:
SUR and SUL — 16 gauge; HSUR and HSUL — 14 gauge
Finish:
ZMAX
Installation:
Use all specified fasteners; see General Notes
These hangers will normally accommodate a 40° to 50° skew
Illustration shows left and right skews SUR/L (SUR = skewed right; SUL = skewed left)
The joist end may be square cut or bevel cut
Options:
Available with the A2 flange turned in on the 2-2x and 4x models only (see illustration)
To order, add "C" (for concealed) to the product name
For example, specify HSURC46, HSULC46, SURC46 or SULC46
