CIP-F22 Flexible Paste-Over Adhesive and Crack Sealant

CIP-F is a flexible, peelable and fast-curing polyurea paste-over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP-F can be peeled off at the completion of a crack injection job by pulling on starter tabs placed under the lead edge surface at the time of application or by prying under the paste-over.

• 1:1 two component, high solids, epoxy amine based adhesive
• Non-sag paste consistency for horizontal, vertical or overhead applications
• Fast set times for shorter times between paste-over and injection
• Remains flexible after cure for easier removal
• Moderate substrate bond; peels away for removal
• Gel Time — 4 minutes at 72°F (22°C), 9 minutes at 40°F (4°C)
• Set Time — 1 hour at 72°F (22°C), and 3 hours at 40°F (4°C)
• Volatile organic compound (VOC) — 0 g/L
• Manufactured in the USA using global materials

• One EMNCIPF22 mixing nozzle is supplied with each cartridge