ETIGV22 Gel Viscosity Injection Epoxy
PRODUCT DESCRIPTION - Click to Enlarge Inset Picture

ETIGV22 Gel Viscosity Injection Epoxy
ETI injection epoxies are two-component, high-solids formulations for the injection into cracks in concrete. Dispensed through a static mixing nozzle using either a manual, battery-powered or a pneumatic dispensing tool, these epoxies provide a waterproof, high strength (structural) repair.
Key Features:
Bonds chemically to concrete, providing structural repair (meets the requirements of ASTM C 881 for structural repair epoxy)
Formulated for maximum penetration under pressure (all viscosities)
Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
Reliable mixing and ratio control when used with the
Simpson Strong-Tie Optimix static mixing nozzle (included with cartridge)
Suitable for pressure injection or gravity-feed
applications
Non-shrink material resists oils, salts and mild chemicals
Final product color: ETI-SLV – dark purple / black; ETI-LV – amber; ETI-GV – gray
ETI-SLV Super-Low-Viscosity Epoxy:
Super-low viscosity (350 cP) repairs hairline cracks (0.002") and cracks up to 1/4" in width
Penetrates smallest cracks
Meets or exceeds AASHTO M-235 and ASTM C881 Type I and IV, Grade 1, Class B and C
ETI-LV Low-Viscosity Epoxy:
Repairs fine to medium cracks 1/64" to 1/4" in width
Offers low surface tension to effectively penetrate narrow cracks
Approved under NSF/ANSI standard 61
Meets or exceeds AASHTO M-235 and ASTM C881 Type I and IV, Grade 1, Class C
ETI-GV Gel-Viscosity Epoxy:
Gel-viscosity (non-sag) epoxy repairs medium cracks 3/32" – 1/4" in width
Decreases in viscosity under pressure, increasing flow
Suitable for use as pick-proof sealant around doors, windows and fixtures
Meets or exceeds AASHTO M-235 and ASTM C881 Type I and IV, Grade 3, Class C
Applications:
Crack Repair: Structural
Crack Repair: Non-Structural
Concrete Crack Repair
Epoxy Injection