PRODUCT DESCRIPTION - Click to Enlarge Inset Picture
LGUM210-2-SDS High Capacity Hanger
High-capacity beam or girder hangers for concrete or masonry applications. Installation is made easier using Strong-Drive SDS Heavy-Duty Connector screws (provided) into the wood member and Titen HD anchors (provided) into the masonry.
Use all specified fasteners (included).
Attach hanger to a concrete or grout-filled CMU wall using Titen HD anchors. Note the following:
– Drill holes using drill bits equal in diameter to the specified Titen HD anchor.
– Holes shall be drilled 1/2" deeper than the specified Titen HD length (i.e. 4 1/2" for a 4"-long Titen HD anchor).
– Caution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor's load capacity.
Titen HD is not recommended for exposed exterior applications.
Provide moisture barrier between beam and wall per jurisdictional requirements.
For HGUM only — Other seat widths available. Order as "X" version.
HGUM available with one flange concealed. See tables for reduced load at end of wall and outside corner.
LGUM/HGUM available in skews up to 45°. See Hanger Options.