Simpson Strong Tie - National Distributor

FWANZ Foundation Wall Angle

FWANZ Foundation Wall Angle
Item# fwanz-zmax
Regular price: $4.13
Sale price: $3.06
Availability: Usually ships the same business day

PRODUCT DESCRIPTION - Click to Enlarge Inset Picture

FWANZ Foundation Wall Angle
FWANZ Foundation Wall Angle

The FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to the mudsill with nails, relying on other anchorage (by Designer) to anchor the sill plate to the foundation.

Key Features:

Compatible with solid sawn joists, I-joists and floor trusses

Testing performed on most common rim materials and types

Addresses design needs set forth in Section 1610.1 in the 2015 / 2018 IBC and Section R404.1 in the 2015 / 2018 IRC

Eliminates the need of costly cantilevered foundation designs

Material:

14 gauge

Finish:

ZMAX coating; see Corrosion Information

Installation:

Use all specified fasteners; see General Notes.

Connector must be fastened directly to the outside face of the rim board with (5) 0.148" x 1 1/2" long nails.

Connector must be located within 4" of adjacent joist/blocking for floor joist spacing up to 48" o.c. and may be centered between joists/blocking for 16" o.c. floor joist spacing.

When floor joists are parallel to the rim board, full depth blocking shall be used in the first two bays of the floor per 2012 / 2015 / 2018 IRC Section R404.1.

Splice joint not permitted on rim board in same bay unless blocking is placed on both sides of the splice.

When I-joist rim material is used, backer blocks must be used. Installed per manufacturer’s recommendations.