ConnectorsOnly
**CONTACT US** (440) 255-8855 x10 Monday-Friday 7:30am-4:30pm ESTHRC22 Hip Ridge Connector
PRODUCT DESCRIPTION - Click to Enlarge Inset Picture
HRC22 Hip Ridge Connector
HRC is a field slopeable connector that attaches hip roof beams to the end of a ridge beam. The HRC may be sloped downward a maximum of 45°.
Material:
16 gauge
Finish:
Galvanized (G90)
Installation:
Use all specified fasteners; see General Notes.
On end of ridge use optional diamond holes to secure the HRC. Bend face flanges back flush with ridge, and complete nailing.
On face of ridge adjust to correct height and install nails.
Double bevel-cut hip members to achieve full bearing capacity.
The HRC may be sloped to 45° with no reduction in loads
HRC is a field slopeable connector that attaches hip roof beams to the end of a ridge beam. The HRC may be sloped downward a maximum of 45°.
Material:
16 gauge
Finish:
Galvanized (G90)
Installation:
Use all specified fasteners; see General Notes.
On end of ridge use optional diamond holes to secure the HRC. Bend face flanges back flush with ridge, and complete nailing.
On face of ridge adjust to correct height and install nails.
Double bevel-cut hip members to achieve full bearing capacity.
The HRC may be sloped to 45° with no reduction in loads