Simpson Strong Tie - National Distributor

HTT4HDG Tension Tie

HTT4HDG Tension Tie
Item# htt4hdg-hdg
Regular price: $32.73
Sale price: $24.24
Availability: Usually ships the same business day

PRODUCT DESCRIPTION - Click to Enlarge Inset Picture

HTT4HDG Tension Tie
HTT4HDG Tension Tie

Tension ties offer a solution for resisting tension loads that are fastened with nails. The HTT4 and HTT5 feature an optimized nailing pattern which results in better performance with less deflection.

HTT5KT is sold as a kit with the holdown, bearing plate washer and Strong-Drive SD Connector screws.

The HTT5-3/4 is designed to use a 3/4"-diameter anchor bolt. 3/4" post-installed anchor bolts are commonly used when retrofitting tension ties to horizontal wood members.

The LTT19 light tension tie is designed for 2x joists or purlins and the LTT20B is for nail- or bolt-on applications. The 3" nail spacing makes the LTT20B suitable for wood I-joists with 0.148" x 1 1/2". The LTTI31 is designed for wood chord open-web truss attachments to concrete or masonry walls and may also be installed vertically on a minimum 2x6 stud.

Material:

See table

Finish:

Hot Dip Galvanized (HDG)

Installation:

See Holdown and Tension Tie General Notes.

A standard-cut washer is required for LTT19 and LTT20B when using 1/2" or 5/8" anchor bolts. No additional washer is required when using a 3/4" anchor bolt.

For information about marriage strap at panelized roof applications, see MSTD.

HTT5-KT requires BP 5/ 8-2 bearing plate and SD10212 Strong-Drive screws (included in kit).