CISLV32 Super-Low-Viscosity Structural Injection Epoxy

CISLV32 Super-Low-Viscosity Structural Injection Epoxy

CI-SLV Super-Low-Viscosity Structural Injection Epoxy is a two-component, high-modulus, high-solids, moisture-tolerant epoxy specially designed for pressure injection, gravity feeding and flood coat filling of concrete cracks when substrate temperatures are between 60°F (16°C)–90°F (32°C). Available in 3-gallon bulk kits or convenient side-by-side cartridges dispensed through a static mixing nozzle using either a manual or pneumatic dispensing tool.

Key Features

Meets the requirements of ASTM C881 & AASHTO M235, Type I/IV, Grade 1, Class C.

Chemically bonds with the concrete to provide a structural repair. CI-SLV seals the crack from moisture, protecting rebar in the concrete from corrosion.

Moisture-tolerant; can be used on dry and damp surfaces.

Low surface tension allows the material to effectively penetrate narrow cracks.

Formulated for maximum penetration under pressure.

Suitable for pressure injection or gravity-feed applications.

Non-shrink and resistant to oils, salts and mild chemicals.

Can be used with metered pressure-injection equipment.

Freeze-thaw resistant.

Applications

Pressure-injection of cracks in structural concrete

Gravity-feed and flood coat of cracks in horizontal concrete

As a low-viscosity epoxy (150 cP) for repair of hairline cracks (0.002") and cracks up to 1/4" (6 mm) in width

For structural repairs

For underwater pressure-injection applications