EMNCIPF22-RP5 CIP-F22 Mixing Nozzles & Nuts (Pack of 5pcs)

EMNCIPF22-RP5 CIP-F22 Mixing Nozzles & Nuts (Pack of 5pcs)

CIP-F is a flexible, peelable and fast-curing polyurea paste-over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP-F can be peeled off at the completion of a crack injection job by pulling on starter tabs placed under the lead edge surface at the time of application or by prying under the paste-over.

Key Features:

1:1 two component, high solids, epoxy amine based adhesive

Mixed material is a uniform gray color

Non-sag paste consistency for horizontal, vertical or overhead applications

Fast cure times for shorter times between paste-over and injection

Remains flexible after cure for easier removal

Moderate substrate bond; peels away for removal

Gel Time — 4 minutes at 72°F (22°C), 9 minutes at 40°F (4°C)

Cure Time — 1 hour at 72°F (22°C), and 3 hours at 40°F (4°C)

Volatile organic compound (VOC) — 0 g/L

Available in a 22 oz. side-by-side cartridge

Manufactured in the USA using global materials

Applications:

Crack Repair: Structural

Crack Repair: Non-Structural

Water / Wastewater Facilities