Product Overview
GCN-MEPKT Gas-Actuated Concrete Nailer with Magazine
The GCN-MEPMAGKT gas-actuated concrete nailer is a portable fastener tool for attaching light-duty fixtures to concrete, steel, concrete block (CMU), lightweight concrete over metal deck, and cold-formed steel. As a magazine tool, GCN-MEPMAGKT is ideal for attaching drywall track, furring strips, hat track and angle track using GDP and GDPS collated pins.
GCN-MEPMAGKT offers you the flexibility of having two tools in one convenient package — a magazine tool and a single-shot tool, since the magazine is easily removed without additional assembly tools. As a single-shot tool, the GCN-MEPMAGKT is great for attaching mechanical, electrical and plumbing fixtures with pre-assembled pins/accessories such as washer pins, ceiling clips, tophats and threaded studs. The pre-assembled pins for the single-shot tool use 0.300"-headed fasteners with 0.125"-diameter shanks for stronger fastening performance.
Both the single-shot and magazine tool offer portability without the need for cords or hoses, and are actuated with GFC34 gas fuel cells.
Key Features:
Power to drive 0.125"-diameter pins
Flexibility to drive 1/2" to 1 1/2" pins
Flexibility to drive 0.250" and 0.300" dia. headed pins
Pin-depth adjustment dial
Battery charge indicator light
Comfortable “sure-grip” rubber handle and ladder hook
Easy start-up procedure: Insert fuel cell, insert battery, load pins, and begin use
Minimum Cleaning Required
The GCN-MEPMAGKT has a very efficient ignition system that provides complete fuel combustion. This results in a cleaner operating tool, which, in turn, results in more tool energy and higher productivity. To maintain maximum level of productivity, periodic cleaning is recommended.
Only requires cleaning every 20,000 shots
Easy access to the air filter and piston chamber
Applications:
Direct Fastening
Gas-Actuated Fastening
The GCN-MEPMAGKT gas-actuated concrete nailer is a portable fastener tool for attaching light-duty fixtures to concrete, steel, concrete block (CMU), lightweight concrete over metal deck, and cold-formed steel. As a magazine tool, GCN-MEPMAGKT is ideal for attaching drywall track, furring strips, hat track and angle track using GDP and GDPS collated pins.
GCN-MEPMAGKT offers you the flexibility of having two tools in one convenient package — a magazine tool and a single-shot tool, since the magazine is easily removed without additional assembly tools. As a single-shot tool, the GCN-MEPMAGKT is great for attaching mechanical, electrical and plumbing fixtures with pre-assembled pins/accessories such as washer pins, ceiling clips, tophats and threaded studs. The pre-assembled pins for the single-shot tool use 0.300"-headed fasteners with 0.125"-diameter shanks for stronger fastening performance.
Both the single-shot and magazine tool offer portability without the need for cords or hoses, and are actuated with GFC34 gas fuel cells.
Key Features:
Power to drive 0.125"-diameter pins
Flexibility to drive 1/2" to 1 1/2" pins
Flexibility to drive 0.250" and 0.300" dia. headed pins
Pin-depth adjustment dial
Battery charge indicator light
Comfortable “sure-grip” rubber handle and ladder hook
Easy start-up procedure: Insert fuel cell, insert battery, load pins, and begin use
Minimum Cleaning Required
The GCN-MEPMAGKT has a very efficient ignition system that provides complete fuel combustion. This results in a cleaner operating tool, which, in turn, results in more tool energy and higher productivity. To maintain maximum level of productivity, periodic cleaning is recommended.
Only requires cleaning every 20,000 shots
Easy access to the air filter and piston chamber
Applications:
Direct Fastening
Gas-Actuated Fastening
