ConnectorsOnly
**CONTACT US** (440) 255-8855 x10 Monday-Friday 7:30am-4:30pm ESTGH48-_ Girder Hanger (Choose Hanger)
 "Pin It")
PRODUCT DESCRIPTION - Click to Enlarge Inset Picture
GH48-6 GH48-6/3 GH48-8 GH48-8/3 Girder Hanger
A girder-to-foundation wall connection.
Material:
12 gauge
Finish:
Simpson Strong-Tie Gray Paint
Installation:
Use all specified fasteners; see General Notes.
Insert four 0.162" x 3 1/2" nails into girder.
H = girder height – mudsill thickness. Measurement is from the bottom of the top flange to the top of the seat.
1 1/2" clearance hole accommodates rebar or anchor. This is not required.
Options:
GH hangers may be skewed to a maximum of 45°; bevel cut required. The allowable loads are 100% of the table load. Specify GHD for saddle-style hangers. GHD may not be skewed.
A girder-to-foundation wall connection.
Material:
12 gauge
Finish:
Simpson Strong-Tie Gray Paint
Installation:
Use all specified fasteners; see General Notes.
Insert four 0.162" x 3 1/2" nails into girder.
H = girder height – mudsill thickness. Measurement is from the bottom of the top flange to the top of the seat.
1 1/2" clearance hole accommodates rebar or anchor. This is not required.
Options:
GH hangers may be skewed to a maximum of 45°; bevel cut required. The allowable loads are 100% of the table load. Specify GHD for saddle-style hangers. GHD may not be skewed.