PRODUCT DESCRIPTION - Click to Enlarge Inset Picture
HELIST254000 Helical Stitching Tie (Box of 10pcs)
The Simpson Strong-Tie Heli-Tie helical stitching tie provides a unique solution to the preservation and repair of damaged brick and masonry structures. Ties are grouted into existing masonry joints to repair cracks and increase strength with minimum disturbance. Made of Type 304 stainless steel, the Heli-Tie stitching tie features radial fins formed on the steel wire via cold rolling process, increasing the tensile strength of the tie.
Helical design distributes loads uniformly over a large surface area
Installs into the mortar joint to provide an inconspicuous repair and preserve the appearance of the structure
Type 304 stainless steel offers superior corrosion resistance to mild steel reinforcement
Patented manufacturing process results in consistent, uniform helix configuration (U.S. Patent 7,269,987)
Batch number printed on each tie for easy identification and inspection
Type 304 stainless steel
Chase bed joint 20" on either side of the affected area to a depth of approximately 1 1/4" with a rotary grinding wheel. Vertical spacing of installation sites should be 12" for red brick or “every other course” for concrete masonry units.
Clear bed joint of all loose debris.
Mix non-shrink repair grout or mortar per product instructions and place into the prepared bed joint, filling the void to approximately two-thirds of its depth. Simpson Strong-Tie FX-263 repair mortar should be used.
Embed the tie at one-half the depth of the void. Trowel displaced grout to fully encapsulate the tie.
Fill any remaining voids and vertical cracks with non-shrink repair grout or other repair mortar to conceal repair site.
Sold in tubes of 10