Simpson Strong Tie - National Distributor

HWPH3.56/11.88 High-Wind Purlin Heavy Hanger

HWPH3.56/11.88 High-Wind Purlin Heavy Hanger
Item# hwph356-1188-gray
Regular price: $64.95
Sale price: $48.11
Availability: Usually ships in 2-3 business days

PRODUCT DESCRIPTION - Click to Enlarge Inset Picture

HWPH3.56/11.88 High-Wind Purlin Heavy Hanger
HWPH3.56/11.88 High-Wind Purlin Heavy Hanger

The HWPH is designed to support joists on purlins or beams in both wood and cold-formed steel construction. This heavy top-flange hanger has enhanced uplift and is ideal for high-wind applications. The HWPH offers design flexibility and versatility that provides very high uplifts and down loads.

Key Features

Modifiable with alteration options including opened/closed top-flange and offset top-flange

Top flange may be sloped to a maximum of 35 to accommodate a sloped header

Features a solid one-piece top flange that provides extra stability in panelized roof applications

Available with a sloped and/or skewed seat up to 45

Material

3-gauge top flange and 7-gauge stirrup

Finish

Simpson Strong-Tie gray paint. Hot-dip galvanized available; specify HDG.

Installation

Use all specified fasteners.

The HWPH may be used for weld-on applications. The minimum-size weld is a 1 1/2"-long fillet weld to each side of the top flange; weld size to match hanger material thickness. See General Instructions for the Installer, note k for weld information. Weld-on applications have the maximum allowable capacity listed. Uplift loads do not apply to this application.

Non-modified hangers can support joists sloped up to 1.4 :12 using table loads. For joists sloping between 1/4 :12 and 3/4 :12 use 85% of the table loads. See technical bulletin Sloped Joist in Non-Sloped Hangers (T-C-SLOPEJST).

Web stiffeners are required for these hangers.

If joist is shorter than hanger by more than 1/2" use only 50% of the table loads.