PRODUCT DESCRIPTION - Click to Enlarge Inset Picture
SSWT15 SSWTBL15 SSWTPF15 SSWTEL15 Steel Strong Wall Anchor Bolt Template
Simpson Strong-Tie now offers anchor bolt stabilizers that may be used with all anchor template models. The bolt stabilizer enables the steel Strong-Wall anchorage to be installed without being tied to the footing rebar cage by helping to eliminate movement of the anchor bolts during concrete placement. Two bolt stabilizers are used for each SSW anchor assembly; one at the embedded plate washer and the other above the template. Half-inch-diameter dowels (not supplied) are then driven down through the bolt stabilizers and into the ground to ensure plumb installation of the anchors and prevent movement during concrete placement. Immediately following concrete placement, the dowels are removed and reused in other locations.
Installation of Steel Strong-Wall templates varies by application. See page 35 in C-L-SW17 for details.